GENERAL SPECIFICATIONS

Strip Materials
Zinc, Brass, Aluminum, Plastic, Stainless Steel in various shapes and sizes

Tolerances

Standard commercial tolerance of +/-.002” in all gauges is permissible.
Strip height: +/- 1/32”
Strip length: + 1/2 ”, - 0
Heavy Top widths: 1/8”, 3/16”, 1/4 ”: +/- .005”
Other widths: +/- .010”

TYPES OF STRIP AVAILABLE
(see drawings for most popular styles)

- Heavy Top
- Stair Channel for abrasion strip
- Double Bead
- Cove Base Dividers (3/4” – 1 1/2 radii, 6” and 8” heights)
- “K” Angle (16gauge or heavy top, 1/8” to 1/2” widths)
- Rijtex “T” (3/8”, 1/2 ”, 5/8” depths)
- Angle Strip (“L” angle, various sizes and materials)
- Base Bead (Projecting, Bevel and Flush types)
- “T” Strip Heavy Top (various sizes and materials)
- Expansion Strip
   (various sizes and materials, black and white rubber typical)

Bases For Heavy Top Strips

Steel bases are hot dipped galvanized steel in a nominal gauge of .028”(+/-.004”).
Zinc and brass are available in a nominal gauge of .032 (+/-.002”).

MANHATTAN AMERICAN TERRAZZO PLASTIC STRIP

Manhattan American Terrazzo offers a variety of plastic divider strips for your needs.
- Standard colors available for Heavy Top Strips (Standard and “L” Angle) are black and white.
- Custom Colors
- Custom Sizes and Shapes
- Can match custom colors

TYPICAL CASE QUANTITIES
Zinc/Brass
	1002 feet
		16gauge standard, “K”, “L” strip
		Rijtex, Base Bead
		1/4” x 1/8” Heavy Top “T” and “L”
	750 feet
		All 1/8” HeavyTop
	504 feet
		All 3/16”, 1/4” HeavyTop
	300 feet
		All 3/8”, 1/2” HeavyTop
		Expansion
Aluminum
	1002 feet
		All 16ga “L” Angle
	750 feet
		All 1/8” and 1/4” HeavyTop “L”
	504 feet
		3/8” HeavyTop “L”
Plastic
	Case quantities vary according to size and quantity ordered.

Case quantities will vary depending on the strip purchased. The above quantities per case are usually applicable.

---

SPECIAL SERVICES/PRODUCTS

Notching
Notching “L” angle base at various intervals to ease bending is available and priced according to notch intervals. Our most popular and cost-effective notching is a v-shape, notched on 1” spacing.

Special Lengths
The standard length of divider strips is 6 feet. Other lengths are available but may be subject to additional charges.

Metal Aggregate
Chips made of zinc, brass or aluminum are available in different sizes and are priced per pound.
Shavings made of zinc or brass are available and priced per pound.

Special Strips
Strips of sizes or materials not found in our price list may be produced as custom strip and are priced according to quantity and labor and material costs.